POWER-Z USB Tester Type-C USB PD Tester QC 3.0 2.0 Charger Voltage Current Ripple Dual KM001 Volt Meter Power Bank Detector
Description
be used to test the PD instrument, the table gives full consideration to the complexity of the physical interface updating when charging, diversity and charging of the agreement will be the most common USB-A interface, Micro USB port, Type-C interface integrated together, in addition to the USB PD measurement professional, can also be used for the measurement of QC3.0/2.0 and another fast charge.
Specifications:
Product Series: POWER-Z
Product Type: KM001
Product Name: Portable USB PD Tester
Operating voltage: 3.6-20V Current:3-5A
Support Agreement: USB PD, Qualcomm QC3.0 / 2.0, MTK PE / PE +, Huawei FCP / SCP, Apple 2.4A, BC1.2, DCP
Function
1.Display voltage, current, power, mAh, mWh
2.Press the menu button can be transferred to the recording interface, you can set to store a variety of different capacity and energy data
3.Each stored data can be deleted and marked
4.Set the recording time interval and maximum capacity
5.Automatic run of the rule setting, current threshold setting
6.End time setting
7.Display the information interface
8.Test line resistance function
It will be measured wire into the tester, followed by a load, the resistance will always beating, until the resistance is stable, the degree, is the size of the line resistance, and there are GOOD evaluation, let you know the wire is good Bad
You can set the waveform display refresh rate, the higher the refresh rate, the faster the display
Plug in the charger, the automatic display D + and D-voltage, the following shows the charger support the charging protocol
Press the menu button, automatically trigger quick charge voltage!、____________________________________________________________________________________________
Packing
Original package + carton box
After-sale service
Please feel free to contact us for any problems at any time:service@fanscreate.com