Wick Desoldering Braid Solder Remover High-Quality Sucking Tin Belt BGA Absorption Line
Description
Sucking tin belt and Tin absorption line for the tin absorbing excess solder, CP-3515/3015/2015/2515/1515 BGA Desoldering Wire Solder wick Except for the tin absorbing excess solder. VIP FIX Sucking tin absorption line for the tin absorbing excess solder
Sucking tin belt BGA Desoldering Braid Solder Wire CP-3515 3015 2015 2515
Desoldering Braid:
Quickly removes unwanted solder when used with a soldering iron.
WARNING:
Only touch the grip and the pack of desoldering wick when desoldering. Failure to do so will result in serious burns.
To avoid fire, never use a soldering iron and desoldering wick around combustibles or in an explosive environment.
CAUTION:
Do not force the tip against the desoldering wick to avoid injury to yourself and/or damage to the parts and PCB.
Do not heat the desoldering wick for more than 5 seconds to avoid damage to the parts and PCB.
How to use
1. Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick. The solder will be absorbed.
2. Remove the desoldering wick after the solder has been absorbed.
3. Cut off the used section of the wick using nippers.
4. Repeat steps 1,2 and 3 if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63% and 60% (tin content) have good absorbability.
____________________________________________________________________________________________________________________________________
Packing
Original package + carton box
After Sales Service
Please feel free to contact us for any problem at any time: service@fanscreate.com